Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
$10.00 - $23.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$17.00 - $40.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)
Replacement pins for Pedro's Pro Chain Tool, Pro Chain Tool 2.0, and Apprentice Chain Tool - Includes two replacement pins
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Featuring updated tooth profiles to optimize the fit between the tool and high performance BB parts. Anodized and laser engraved for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16-notch 39mm OD cups - Fits: Shimano XTR BB93, Dura-Ace BB9000, Token - Added depth to fit Shimano STEPS square drive motor
The BKD-1 Hydraulic Brake Bleed Kit will bleed most models of DOT-fluid-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount - Housed in a rugged reusable case - Machined stainless steel and 7075 aluminum fittings to service SRAM, Hayes, Formula, Hope and other brands of DOT-fluid-based hydraulic brake systems - Replacement parts available - Brake fluid not included
Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road.
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
Park's Screw-Type Chain Tool is the ideal shop tool for easy and reliable chain maintenance and repair. The sliding shelf makes it compatible with 1/8th-inch chains and all 3/32nd-inch chains, from 5- to 11-speed. It's made from investment-cast tool steel and has long vinyl-coated handles and fine threading for easy chain pin removal. It also includes a stiff-link loosener and comes with an extra pin.
Precision measurement awaits with Park's Tape Measure. This small and handy tool boasts a tough, composite housing, as well as both Metric and English readings of up to 3.65 meters/12 feet.
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Lezyne's CRV 20 compact multi-tool has what you need for road and trailside repairs. It boasts a myriad of tools including: 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches plus flat-head and Phillips screwdrivers. There's also a chain tool, a T25 Torx bit, a disc-brake-pad separator, an 8mm open-end wrench and three spoke wrenches. For freeing stubborn tires, a tire lever with a 10mm open-end wrench is included. And, there's a serrated knife, too.
Durable, fiber-reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g - Flow Storage Cage - CO2 Head - V16 Multi-Tool - Smart Kit Glueless Patch Kit - Two included 16g CO2 cartridges
Lightweight, low-profile multi-tools optimized for modern component groups. CNC machined aluminum side plates with integrated magnetic quick link holder (SV 16 only). Forged, Center-Pivot stainless steel bits. Durable stainless steel fastening hardware. - Weight: 125g - Dimensions: 48W × 63L × 12H (mm) Tool Bits - Hex 2, 2.5, 3, 4, 5, 6, 8mm - Star Shaped T25, T30 - Flat Head - Chain Breaker: (9/10/11/12 speed) - Tire Lever: Open end 10mm - Spoke Wrenches: Mavic MTB, 3.22, 3.45
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
- Kit includes tape, 2 valves & 1 valve core wrench
Convenient, state-of-the-art clincher repair kit with a stealth ‘carbon-look’ finish fits securely in cages for a reliable storage case. Rattle-proof padding for a noiseless ride. - Includes: XLAB Tri Tool Kit, 2 tire levers, (2) CO2s, Speed Chuck inflator and patch kit. Capacity: 25.8 in3 (423 cm3) - Height: 5.25 in (133.5 mm) - Weight: 447g (Gear Box Kit w/ full repair kit + spare tube), 65g (Gear Box empty)
This opener grips the bottle cap like a wolf on prey and pops it right off every time! We even added a slot for truing your brake rotors and a large hole for a keychain or carabiner. This is not just some generic opener we selected from a catalog – this is a precision engineered tool that you will want to have with you all the time. Weight is a mere 32g so you can carry it with you wherever you go (even on the bike). - Precision shaping for the best bottle opening experience - Grips the bottle cap like a wolf on prey and pops it right off every time - Features slot for truing brake rotors and a large hole for a keychain or carabiner - Made in the USA from 7075 T6 aluminum - 32g
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$21.88 - $39.36
- Spinner handle: bi-mold comfort grip handle and 9" length - Ratchet: 36t ratchet, quick release, finger fit handle and 7-3/4" length - Flex drive bar: swivel head and 10" finger fit handle - All drivers feature ball and spring socket retention
Page 1 of 23 Next page